7 Reasons Why Forklifts that Use Propane Are Better than Others

forklift propane tank for sale

Forklifts that run on propane have a number of advantages compared to their alternatives – diesel, gas, and electric. In terms of its use, budget-friendliness, safety concerns and economy, you can cat get the most of its advantages.

  1. Easy Refueling – It only takes about 3 to five minutes to change an emptied cylinder with a new one. Gas and diesel-powered forklifts can be hazardous and take serious safety concerns when refueling. Electric forklifts usually take 8 hours to charge completely.
  2. It is much more economical – propane-powered forklifts are the most economical to maintain. Propane gas produces a very minimal amount of gunk and deposits inside the engine, it considerably reduces machine maintenance.
  3. It only takes 3-5 minutes to change an emptied cylinder, which means, it takes much fewer man-hours to refuel.
  4. Fuel Consumption is highly improved - A 33-pound tank can produce enough power to run the forklift for about eight hours. The cost of propane is cheaper than fuel or gas.
  5. Added Safety – Forklifts that run on propane have a safety valve that automatically shut off in the event of an accident. This is a great feature to improve safety at the workplace. Safety must be met by giving in-house lectures to all forklift operators.
  6. Environment-Friendly – Burning produces minimal carbon dioxide, the harm to the environment is greatly reduces. On the other hand, its counterpart gas and diesel can produce large amounts of carbon monoxide, nitrogen oxide and other hydrocarbons. Not only it is harmful to the people around but to the environment as well.
  7. Can Maximize the Use of Forklift - Because of the advantages mentioned above, propane-powered forklifts can be used indoor and outdoor to make the most of their use and purpose. An electric forklift can only be used inside the warehouse and gas or diesel-powered can only be used outdoors because of the toxic smoke it emits.



Basic Forklift Propane Tank Specifications

Propane tanks vary in size, characteristics and are made by well-known companies. When buying a cylinder you do not have to know the different technicalities involved. But the tank you will be buying must have the following:

  • Nameplate – the name nameplate should bear the name of the manufacturer, capacity, weight, and much other important information about the cylinder. Aside from these, ASME specifications must also be present in the nameplate.
  • Protected Regulators - It controls the flow of propane, lowers or increases the pressure. It is an essential part that manages the gas pressure. It should be hidden or covered to prevent accidental damage.
  • Visibility of the Tank – Steel cylinders attract rust and are commonly painted with heat reflective colors. While, the aluminum tank has a smooth and mill finish, no need to be painted. It is also rust and corrosion resistant lengthening the life and use of the cylinder.

Why Choose Aluminum Propane Cylinders (Aluminum vs. Steel)

  • Aluminum is much lighter – The aluminum tank weighs much lesser and can accommodate the same amount of pressure capacity. It’s also much easy to hand lift than steel, improving its installation efficiency and reducing workers’ back injuries.
  • Tougher and stronger – Aluminum has the characteristics to be lighter but doesn’t mean it’s weaker. It’s more durable and can last longer than steel.
  • Corrosion-resistant and rust-proof – Propane forklifts are used in different work set up and environments for thousands of hours. Its cylinders are exposed to different environmental conditions as well – humidity and dryness. Aluminum can resist these conditions, prolonging its use.
  • No leakage with overtime use – Rust eats steel overtime, thinning the wall of the cylinder that can produce unseen leakage. Since aluminum is much rust-resistant, there’s a much less probability of gas leakage. Escaping gas causes frequent changing of cylinders minimizing its productive use. It can also cause a safety hazard to forklift operators.
  • The Interior of the tank is scale-free – Aluminum produces no scaling inside the tank when using overtime. Moist and propane deposits can produce the cylinder wall to chip/flake. It eats the metal from the inside. The deposits of rust scale can obstruct the forklift gas intake system, leading to poor forklift operation and eventually machine break down. If you have a small fleet and business that solely relies on forklift operation, then having a broken piece of equipment due to improper cylinder use, can be a big pain in the rear.
  • Produce no sparking – Propane is a flammable gas, a single spark can cause it to explode. Aluminum is spark-resistant than can avoid accidental explosion and injury. Remember, OSHA can impose a stiff fines to businesses when they found out that an accident is due to the employer’s ignorance.
  • Aluminum need not be painted – NFPA 58 states that the gas tank must be painted with a heat deflective color that only applies to steel. Aluminum is shiny and with a gleaming finish, no need to be painted.

Propane Tanks For Sale

When buying a cylinder, you must remember that the 33-pound tanks are mainly used by many industrial propane-powered forklifts as the main basis of fuel. These tanks are intended for liquid service, therefore, they have to be installed correctly on the forklift for continuous and proper operation. The 33-pound tank can be used by the forklift and can give 7 to 8 hours of non-stop power.

 Aluminum Cylinders 
Worthington 336053 43-Pound Aluminum Forklift Propane Cylinder With Gauge And Fill Valve
Manchester Aluminum Propane Tank 33.5 Lb 8 Gallon Forklift Fork Horizontal Vertical New Lpg

Steel Cylinders 


Worthington 282077 33-Pound Steel Forklift Cylinder With Gauge And Fill Valve