In New Hampshire, getting hold of a forklift certification can dramatically increase your likelihood of landing your much need employment. The forklift training could give you proficiencies to become a suitable nominee for long-awaited salary raise and promotion.
You need a certificate to operate forklift and other types of heavy equipment legally and taking the training should be easy, here, we readied these steps so you can get a certificate in the soonest possible time.
Obtaining Your Forklift Certification
As per OSHA legislation, the employers are in charge of their operator’s certification training. The operator could either be certified by an in-house professional or designed trainer. Operators can also be sent to a training school where they will obtain their education.
For fresh individuals who are interested in pursuing a vocation driving forklifts, can obtain their certification from the training providers, listed below. Enrolling for a course takes only 1 -2 days and could cost not as much as $150.
Following these steps could help you out getting your certification in no time:
- Decide what machine you want to operate, because training should be specific to the machine you’ll be operating.
- Enroll for the course. The course has two components: classroom education and behind-the-wheel operation. The trainer monitors your progress and will make the necessary adjustment based on your skill level.
- Written exam follows. You must pass at least 70% of the questions for you to become eligible.
- Upon passing the test, you will then evaluated based on your performance you exhibited during the forklift driving operation.
- When you fulfilled the competency requirements and trainer is contented with your performance. He will sign your certification and license card, which has three years validity.
Before continue reading, I invite you to CHECK these articles relevant to getting certified:
- How Long is the Forklift Training to Finish?
- Is Online Training Right for You?
- What Are Your Work Responsibilities and Description?
- How to Become Fully Certified to Operate the Lift Trucks as per OSHA Standard?
- Where Can You Take the Forklift Training?
- How To Replace Forklift License/Certificate if Lost or Stolen
- What are the Requirements For Enrolling in a Training Course?
- When Do You Need Forklift Refresher Course?
- Can You Use Your Forklift Certification to Work in Other State?
- Can You Use Your Forklift Certification to Work for Another Employer?
- Can You Get a Forklift Job If Your Have DUI Charges?
If you are an employer and wanting to get your operators certified, here are the subjects you need to know, READ these:
- On-Site Forklift Training is the Best Option for You
- How to Provide Cost-Effective Training to Save Money?
- It is Your Obligation to Provide Training for Your Workers
- How are Operators Being Trained to be OSHA Certified?
- Workers are Injured at Work, Are You Liable?
- Is Vision of Hearing (Deaf) Impairment Prevents an Operator from Operating the Forklifts?
- Do Employers Need to Provide Forklift Training for Each Make and Model?
Forklift Training Schools in New Hampshire
The schools are the best places to apply for forklift training. They have the capacity to grant licensing course for all those needing it. Here are some of the schools and training providers in the state:
- Associated Builders and Contractors of New Hampshire & Vermont - 58 Chenell Drive Route 106, Concord, NH 03301, Phone: 603-226-4789
- NITCO - 114 Hall Street, Concord, NH 03301, 877.767.0655 or 603.717.0390
- W.D. Matthews Machinery - 309 Sheep Davis Rd, Concord, NH 03301, (603) 225-1171
- National Safety Council of Northern New England - 2 Whitney Rd., #11, Concord, NH 03301, Phone: (603) 228-1401, (800) 834-6472
- United Rentals - 2 Sutton Circle, Hooksett, NH 03106, 603-622-1555, Fax: 603-625-5065
- New Hampshire Motor Transport Association - 19 Henniker Street, Concord, NH 03301, (603)224-7337
- Forklift Training Plus - P.O. Box 2183, Salem, NH. 03079, (603)421-8952
- Leighton A. White, Inc. - 468 Route 13 South, Milford, NH 03055, PHONE: (603) 673-2294, FAX: (603) 672-8320
- US Forklift Certification - (866) 556-USFC (8732), serves many states as well
- OSHA Courses - J.C. Cleveland Federal Bldg, 53 Pleasant Street, Room 3901, Concord, New Hampshire, T:(603) 225-1629, F: (603) 225-1580
You can get your certification from any school outside New Hampshire. The forklift certification is nationally recognized. You can use your license when you want to work in another state.
You cannot be certified by taking the training course online. OSHA requires that all operators must undertake the classroom lectures and hands-on operation training.
If you are having a hard time how to choose the training school right for you, READ this:
Forklift Operator Salary in this State
In New Hampshire, a certified forklift driver can earn as much $38,487 per year on average. To have better how much you can receive, as of February 26, 2021 report of Salary.com, here are the cities of this state that offer the high wage for forklift drivers:
|$41,104 - Amherst||$41,104 - Hollis|
|$39,600 - Antrim||$39,928 - Jaffrey|
|$40,497 - Atkinson||$38,833 - Laconia|
|$38,904 - Auburn||$41,104 - Londonderry|
|$39,643 - Bennington||$38,904 - Manchester|
|$37,931 - Bath||$39,889 - Lyndeborough|
|$41,104 - Brookline||$39,583 - Marlborough|
|$38,886 - Candia||$41,086 - Milford|
|$39,278 - Chesterfield||$40,944 - Mew Ipswich|
|$40,446 - Danville||$41,104 - Nashua|
|$39,018 - Dunbarton||$40,497 - North Salem|
|$40,120 - East Derry||$40,914 - Pelham|
|$40,471 - East Hampstead||$40,012 - Rindge|
|$39,917 - Fitzwilliam||$39,739 - Spofford|
|$38,904 - Goffstown||$40,944 - Temple|
|$40,484 - Hampstead||$40,800 - Windham|
|$39,701 - Hancock||$41,033 - Wilton|
You may likely to receive a higher salary offer if you presented proofs of aptitude competency from past employment.
Opportunity opens up when you show signs of productiveness and seriousness towards your job. The employer may reward you of raise and promotion.
To See the Complete List of Operator Salary per Cities of NH, CHECK this:
When Do You Need Refresher Forklift Training
- When an operator is implicated in a workplace accident. Near misses and minor mishaps are the common occurrence in the workplace, in order to alleviate serious accident, operators must be retrained. The misdemeanor could lead to serious trouble, in as early as possible, the mistake must be corrected.
- There will always be unruly employees, there’s no doubt about that. Those individuals should not be driving forklifts if such behavior could not be corrected. The retraining must be stringent for this individual.
- Forklift operators assigned to drive trucks other than those what he is familiar with should take refresher retraining. OSHA states that training must be machine specific.
- There are instances that employers change workplace location. Refresher must be conducted for all operators to familiarize them with the working environment.
- We cannot dictate weather, there are areas of too many rains and snow, there are those with extreme heat. Proper education should be given to operators to cope with such condition.
If you need guidance or you want to bring out your complaints about workplace safety, health and wage standards, you can visit corresponding offices below:
New Hampshire Department of Labor
95 Pleasant Street, Concord, NH 03301
OSHA New Hampshire
Concord Area Office
J.C. Cleveland Federal Bldg
53 Pleasant Street, Room 3901
Concord, New Hampshire 03301
Other Cities of NH
Manchester, Nashua, Concord, Dover, Rochester, Keene, Derry, Portsmouth, Laconia, Lebanon, Claremont, Somersworth, Londonderry, Durham, Berlin, Hampton, Exeter, Milford, Franklin, Hanover, Hudson, Newmarket, South Hooksett, Suncook